Had a good day in the shop, busy.
Cut all the drawer bottoms and started assemble of the drawers, after a little fine tuning. Also took time to predrill holes to mount the drawer faces.
All parts laid out.
Large drawer in clamps, prior to nailing.
Took a little while to get all the drawers assembled, but I did it. Sort of like Bandit’s shop, stack stuff on the table saw.
A stack of drawers.
And more drawers and a base cabinet.
Had to fine tune the drawer faces by cutting to length, sled for the table saw worked like a charm.
So a stack of doors and drawer faces.
So tomorrow will be a sanding day.
Thanks for reading and comments are always welcome and appreciated.
And I get my assembly bench / table back.