layout of first layer of rear tire.
glued layer
This is my jig f to cut the slots for the (20) treads. Not fancy but it works.
I used my 80 tooth blade to plot thr slot positions. I could not find my compass for the layout. Saw the 80 tooth blade hanging on the wall and that little light bulb went off. Worked like a champ.
I taped off the tire portion to paint the rim portion. 6 to 8 coats of yellow. The black(later on) is hand painted with two coats of flat black and then 3 layers of clear coat.
Will do more later. Enjoy. Will answer any questions if I can.